,
HARGA RP 6,500,000
Integrated AIS Receiver
With an integrated AIS receiver, the IC-M506 can show AIS
vessel traffic information on the display. The AIS target call function
allows you to easily set up an individual DSC call. The Plotter, Target
list and Danger list can be toggled on the display.
AIS Plotter
AIS Target List
Channel and Position
NMEA 2000® and NMEA 0183 Connectivity
With the plug-and-play functionality of NMEA 2000, the
IC-M506 can easily connect to a NMEA 2000 network and interconnect with
other equipment. Also the
NMEA 0183 input/output can be used for external GPS/NAV interface.
Last Call Voice Recording
The last call voice recording function automatically
saves the last two minutes of the last incoming call. You can also start
recording manually.
Active Noise Cancelling
The built-in bidirectional active noise cancelling
reduces background noise to up to 90% and improves both your transmitted
voice and incoming call.
25W Two-Way Hailer
When connected to an external hailer horn, you can talk
to people on the deck or shore from the radio’s microphone and can hear
people’s reply via the hailer horn. Foghorn and RX speaker functions are
also available.
Optional COMMANDMIC™ HM-195B/SW
The optional COMMANDMIC, HM-195B/SW provides 2nd station
capability for using the IC-M506 from a separate cabin or tower. Most
functions including DSC and AIS functions can be controlled from the
COMMANDMIC and can be used as an intercom between the IC-M506 and the
COMMANDMIC.
Large LCD and Intuitive User Interface
The IC-M506 is equipped with 132×96 pixels dot-matrix
display which is larger than the IC-M504 (132×64 pixels).
Reading GPS, AIS, DSC and radio menus are easier than ever. The
bottom line of the display shows the software key functions and the
functions can be toggled with the left and right buttons.
.
.